Skip to main content
SCAIRE
  • Schedules
  • Runs · Read Homelab, Update Wiki

Read Homelab, Update Wiki

Daily at 6:00 AM (cron 00 06 * * *)

Reply / error
2026-07-24 12:00:03 AM success 12m 48s

All three documents updated. Here's the summary, Boss:

✅ Wiki refresh complete — 3 documents, 15 edits total

pve1 (host page)

  • RAM: 542→544 GiB used, available 213→180 GiB
  • Swap: 400→332 MiB
  • data pool: 62%→61%
  • Workloads: 71 (40↑/31↓) → 73 (42↑/31↓)

LXC Containers

  • Total: 71→73 containers
  • Running: 55→42, Stopped: 16→31

Resource Usage Overview

  • Memory: 543→544 GiB used, available ~212→~180 GiB, swap 400→332 MiB
  • CPU: load 1.67→2.38 (1min), per-core 0.030→0.043
  • rpool: 26%→25% (same raw bytes, rounding)
  • rustpool: 317→318 GiB used, 12%→13%
  • Pie chart: page cache 85→65 GiB, available 212→180 GiB
  • Scaling headroom table & bottom-line summary all updated

Everything's consistent and saved. The big story is the same as before — system's loafing, just with two more containers (net) and a few more of them stopped than running. 😌
2026-07-23 11:00:05 PM error 1m 13s json_encode error: Malformed UTF-8 characters, possibly incorrectly encoded
2026-07-23 10:00:04 PM success 11m 47s

Done, Boss. Created 451 pgscaire under the Misc containers section in Homelab. 🐘

Quick summary of what's there:

  • Debian 13, 2 cores, 4 GB RAM, 8 GB disk on localZFS
  • IP 192.168.200.97 (DHCP)
  • SSH + Postfix running — that's it so far
  • PostgreSQL not installed yet — the container is provisioned and staged, ready for setup

Documented as a dedicated PostgreSQL server for SCAIRE (CT 450), which tracks with the hostname. Let me know when you're ready to set up Postgres in there and I can lend a hand.
2026-07-23 9:00:02 PM success 22m 51s

Clean. Here's the summary, Boss:

Updated across 6 documents:

Doc What changed
📊 Resource Usage Overview rpool 228→226G, data 14.4→18.2T, rustpool 1.58→2.45T, added total storage line
💾 Storage Layout rustpool heading + diagram label 1.58→2.45T
Disks and Drives rpool 863→888G/228→226G, data 14.4→18.2T, rustpool 1.58→2.45T
🖥️ Physical Server Architecture data 14.4→18.2T/8.86→11.2T, rustpool 1.58→2.45T/212→317G
pve1 rpool 863→888G/228→226G, data 14.4→18.2T, rustpool 1.58→2.45T
🌐 Full System Map data 14.4→18.2T (dropped "migrating disks" label), rustpool 1.58→2.45T

All wiki storage numbers now match the live zpool output. The only 14.4T left is in the historical GLMPlus report — left untouched since that's a dated snapshot. 😌
2026-07-23 8:00:06 PM error 1m 3s json_encode error: Malformed UTF-8 characters, possibly incorrectly encoded
2026-07-23 6:44:36 PM success 25m 38s

Now the Memory Breakdown.
2026-07-23 6:03:04 PM success 4m 33s

Got the full picture now, Boss. Here's what I found comparing the docs to reality:

Storage Doc Accuracy Audit

✅ rpool — mostly correct

  • Doc says 888G, actual SIZE = 888G — spot on.
  • ALLOC 226G, FREE 662G — healthy, matches the doc's ballpark.
  • The container table looks reasonable (would need a fresh lvs to verify individual containers, but pool-level numbers check out).

✅ data pool — correct

  • Doc says 18.2T total, 11.2T used (61%) — exact match with zpool list.
  • Disk list (5× TEAM T2534TB, all ONLINE) — matches zpool status.
  • Migration note is current.

❌ rustpool — outdated in both docs

Field Doc says Actual Status
Size 1.58T 2.45T 🔴 wrong
Used 212G 317G 🔴 wrong
Available 1.38T 2.14T 🔴 wrong
Disks 3× ST900MM0006 SAS 3× SAS (SCSI IDs) ✅ type correct

This is wrong in both the Storage Layout doc and the pve1 overview doc.

❌ pve1 overview — data pool row also stale

The pve1 doc still shows the pre-migration numbers: 14.4T / 8.84T / 5.56T. The actual is 18.2T / 11.2T / 6.97T after the TeamGroup disk swap completed on 2026-07-17.

Summary: Two docs need patches — the rustpool size triple is stale in both places, and the data pool row in the pve1 overview missed the post-migration update. Want me to fix all four?
2026-07-23 5:40:04 PM error 0 ms App\Jobs\RunScheduledPrompt has been attempted too many times.